Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › UREA PUMP CONTROL ECU › 2019.02–2019.06
RM35X0E _51 Engine / Hybrid System _079220 1GD-FTV EMISSION CONTROL _0384129 UREA PUMP CONTROL ECU A

1GD-FTV EMISSION CONTROL  UREA PUMP CONTROL ECU  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT SEAT ASSEMBLY LH

Hide 89678B 2.REMOVE NO. 2 UREA PUMP CONTROL BRACKET

a.
A436328

Detach the 2 clips and remove the No. 2 urea pump control bracket from the No. 1 urea pump control bracket.


Hide 896B1 3.REMOVE UREA PUMP CONTROL ECU

a.
A436329C01
0,0 0,0 false
V100135

Press
V113147

Move in this Direction


While pressing the lever lock indicated by the arrow shown in the illustration, move the lever in the direction indicated by the arrow shown in the illustration to unlock the connector, and then disconnect the connector from the urea pump control ECU.

NOTICE:

After disconnecting a connector, make sure that dirt, water and other foreign matter do not contact the connector.



b.
A440857

Remove the 2 bolts and No. 1 urea pump control bracket from the body.


c.
A440858

Remove the 3 bolts and No. 1 urea pump control bracket from the urea pump control ECU.