Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › EGR BYPASS VALVE SWITCHING VALVE › 2019.02–2020.05
RM35X0E _51 Engine / Hybrid System _079220 1GD-FTV EMISSION CONTROL _0384173 EGR BYPASS VALVE SWITCHING VALVE A

1GD-FTV EMISSION CONTROL  EGR BYPASS VALVE SWITCHING VALVE  INSTALLATION  


PROCEDURE

Hide 25894 1.INSTALL NO. 1 FILTER

a.

Install the No. 1 filter to the No. 1 vacuum switching valve assembly.


Hide 25860 2.INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY

a.

for Double Actuator EGR Bypass Valve:

Install the 2 No. 1 vacuum switching valve assemblies to the bracket with the 2 screws.

Torque:
1.4 N*m (14 kgf*cm, 12 in.*lbf)


b.

for Single Actuator EGR Bypass Valve:

Install the No. 1 vacuum switching valve assembly to the bracket with the screw.

Torque:
1.4 N*m (14 kgf*cm, 12 in.*lbf)


c.

for Double Actuator EGR Bypass Valve:

Install the 2 vacuum hoses to the 2 No. 1 vacuum switching valve assemblies.


d.

for Single Actuator EGR Bypass Valve:

Connect the vacuum hose to the No. 1 vacuum switching valve assembly.


Hide 25804 3.INSTALL VACUUM CONTROL VALVE SET

a.

for Double Actuator EGR Bypass valve:

Connect the No. 4 vacuum transmitting hose to the No. 1 vacuum switching valve assembly.


b.

Connect the No. 3 vacuum transmitting hose to the vacuum control valve set.


c.

Install the vacuum control valve set to the intake manifold with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


d.

for Double Actuator EGR Bypass Valve:

Connect the 3 vacuum hoses to the vacuum control valve set and No. 2 EGR valve assembly.


e.

for Single Actuator EGR Bypass Valve:

Connect the 2 vacuum hoses to the vacuum control valve set and No. 2 EGR valve assembly.


f.

for Double Actuator EGR Bypass Valve:

Connect the 2 connectors to the vacuum control valve set.


g.

for Single Actuator EGR Bypass Valve:

Connect the connector to the vacuum control valve set.


h.

Connect the engine wire bracket with the bolt.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


i.

Attach the clamp and connect the connector to the vacuum control valve set.


Hide 12601B 4.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Cover)