Home › Engine / Hybrid System › 1GD-FTV (LUBRICATION) › OIL LEVEL SENSOR
RM35X0E _51 Engine / Hybrid System _079221 1GD-FTV LUBRICATION _0384267 OIL LEVEL SENSOR A

1GD-FTV LUBRICATION  OIL LEVEL SENSOR  INSTALLATION  


PROCEDURE

Hide 89491 1.INSTALL ENGINE OIL LEVEL SENSOR

a.

Install the engine oil level sensor to the oil pan sub-assembly with the 4 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


b.

Connect the connector to the engine oil level sensor.


Hide 51405A 5.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 52618 6.INSTALL LOWER FRONT BUMPER ABSORBER

Hide 51406A 7.INSTALL NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY (w/ No. 2 Engine Under Cover Sub-assembly)