Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT BLOWER MOTOR › 2019.02–2019.06
RM35X0E _58 Vehicle Interior _079316 HEATING / AIR CONDITIONING _0384879 FRONT BLOWER MOTOR A

HEATING / AIR CONDITIONING  FRONT BLOWER MOTOR  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 55642 1.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER

Hide 87103B 2.REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY

a.
E400969C01
0.063,0.042 0.313,0.25 0.25,0.208 12 true *A 0.063,2.656 0.313,2.865 0.25,0.208 12 true *B
*A for Single Layer Blower Type
*B for Two Layer Blower Type
V100135

Screw
V100136

Connector


Detach the clamp.


b.

Disconnect each connector.


c.

Remove the 3 screws and blower with fan motor sub-assembly.