87138G
1.INSTALL REAR COOLER BLOWER RESISTOR
Use the same procedure for the other side.
|
Screw |
|
Connector |
Install the rear cooler blower resistor with the 2 screws.
Connect the connector.
2.INSTALL ROOF HEADLINING ASSEMBLY
for Semi-trim:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Semi-trim)>INSTALLATION
for Full-trim:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Full-trim)>INSTALLATION