1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
2.REMOVE FRONT BUMPER ASSEMBLY
86510
3.REMOVE HIGH PITCHED HORN ASSEMBLY (for 2-piece Type)
Click hereVehicle Exterior>HORN>HORN>REMOVAL
86520
4.REMOVE LOW PITCHED HORN ASSEMBLY
Click hereVehicle Exterior>HORN>HORN>REMOVAL
5.REMOVE CONDENSER FAN (for 1GD-FTV, w/ Condenser fan)
17311B
6.REMOVE NO. 1 AIR INLET DUCT (for 1GD-FTV, w/o Condenser fan)
53286F
7.REMOVE RADIATOR SIDE AIR SEAL LH (w/o Condenser fan)
|
Remove in this Direction |
Detach the clip and claw to remove the radiator side air seal LH.
53285N
8.REMOVE RADIATOR SIDE AIR SEAL RH (w/o Condenser fan)
|
Remove in this Direction |
Detach the claw and remove the radiator side air seal RH.
88703
9.DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY (for 1GD-FTV)
Remove the bolt and disconnect the discharge hose sub-assembly.
Remove the O-ring from the discharge hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88710
10.DISCONNECT AIR CONDITIONING TUBE ASSEMBLY (for 1GD-FTV)
Using a double wrench, remove the union nuts and disconnect the air conditioning tube assembly.
Remove the O-ring from the air conditioning tube assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88703
11.DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY (for 7GR-FKS)
Remove the bolt and disconnect the discharge hose sub-assembly.
Remove the O-ring from the discharge hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88710
12.DISCONNECT AIR CONDITIONING TUBE ASSEMBLY (for 7GR-FKS)
Remove the bolt and disconnect the air conditioning tube assembly.
Remove the O-ring from the air conditioning tube assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
53510
13.REMOVE HOOD LOCK ASSEMBLY (for LHD)
53510
14.REMOVE HOOD LOCK ASSEMBLY (for RHD)
53209B
15.REMOVE HOOD LOCK SUPPORT BRACE SUB-ASSEMBLY
for 7GR-FKS:
Click hereEngine / Hybrid System>7GR-FKS (COOLING)>RADIATOR>REMOVAL
for 1GD-FTV:
Click hereEngine / Hybrid System>1GD-FTV (COOLING)>RADIATOR>REMOVAL
17751
16.REMOVE NO. 1 AIR CLEANER INLET (for 1GD-FTV)
44360
17.DISCONNECT VANE PUMP OIL RESERVOIR ASSEMBLY (for 1GD-FTV)
53205
18.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY (for 1GD-FTV)
19.REMOVE COOLER BRACKET (for 1GD-FTV)
| *a | Clamp |
Remove the 2 bolts.
Detach the guide and clamp and remove each cooler bracket.
20.REMOVE COOLER CONDENSER ASSEMBLY (for 1GD-FTV)
|
Remove in this Direction |
Remove the cooler condenser assembly as shown in the illustration.
88716B
21.REMOVE COOLER REFRIGERANT LIQUID PIPE B (for 1GD-FTV)
Remove the bolt and cooler refrigerant liquid pipe B.
22.REMOVE NO. 1 COOLER CONDENSER CUSHION (for 1GD-FTV)
|
Remove in this Direction |
Remove each No. 1 cooler condenser cushions.
52139E
23.REMOVE FRONT BUMPER CENTER BRACE (for 7GR-FKS)
Remove the 2 bolts and front bumper center brace.
24.REMOVE COOLER BRACKET (for 7GR-FKS)
| *a | Clamp |
Remove the 2 bolts.
Detach the guide and clamp and remove each cooler bracket.
25.REMOVE COOLER CONDENSER ASSEMBLY (for 7GR-FKS)
|
Remove in this Direction |
Remove the cooler condenser assembly as shown in the illustration.
26.REMOVE NO. 1 COOLER CONDENSER CUSHION (for 7GR-FKS)
|
Remove in this Direction |
Remove each No. 1 cooler condenser cushions.