16400
1.REMOVE RADIATOR ASSEMBLY
88451B
2.REMOVE VISCOUS HEATER CRANKSHAFT PULLEY (w/ Viscous Heater)
Remove the 4 bolts and viscous heater crankshaft pulley from the crankshaft pulley.
13496
3.REMOVE CRANKSHAFT PULLY COVER (for Automatic Transmission)
w/ Viscous Heater:
Remove the crankshaft pulley cover from the crankshaft pulley.
w/o Viscous Heater:
Remove the 4 bolts and crankshaft pulley cover from the crankshaft pulley.
13407
4.REMOVE CRANKSHAFT DAMPER SUB-ASSEMBLY (for Manual Transmission)
Using SST, hold the crankshaft damper sub-assembly and loosen the crankshaft pulley set bolt.
Make sure to leave the crankshaft pulley bolt screwed into the crankshaft by 2 or 3 threads.
Using SST, remove the crankshaft pulley set bolt and crankshaft damper sub-assembly from the crankshaft.
13471
5.REMOVE CRANKSHAFT PULLEY (for Automatic Transmission)
Using SST, hold the crankshaft pulley and loosen the crankshaft pulley set bolt.
Make sure to leave the crankshaft pulley set bolt screwed into the crankshaft by 2 or 3 threads.
Using SST, remove the crankshaft pulley set bolt and crankshaft pulley from the crankshaft.
11303A
6.REMOVE FRONT CRANKSHAFT OIL SEAL
Using SST, remove the front crankshaft oil seal from the timing chain cover assembly.
After removal, check the crankshaft for damage. If damaged, smooth the surface with #400 sandpaper.