CHECK BASIC FUNCTION
Check that all doors lock when the lock side of the door control switch is pressed.
Check that all doors unlock when the unlock side of the door control switch is pressed.
Check that all doors lock when the door key cylinder is turned to lock using the mechanical key.
Check that all doors unlock when the door key cylinder is turned to unlock using the mechanical key.
CHECK KEY LOCK-IN PREVENTION FUNCTION
In order to prevent the key from being locked in the vehicle, the following inspection should be performed with the driver door window open.
Turn the ignition switch to ON or ACC or insert the key into the ignition key cylinder.
With the driver door open, check that all of the doors unlock immediately after the door lock knob for the driver door is pressed.
With the driver door open, check that all of the doors unlock immediately after the lock side of the door control switch is pressed.
With the driver door open, press the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all of the doors unlock.
CHECK SECURITY FUNCTION OF THE DOOR LOCK CONTROL SYSTEM
Close all doors and leave the driver door window open so that the door control switch can be operated from outside the vehicle. (Step 1)
Hold the outside handle of the driver door, open and close the door while holding the handle open (confirm that the lock knob remained in the lock position). Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.
Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.
Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless key operation. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.*
Check that the security function of the door lock control system is canceled under the following conditions:
The engine is started.
The unlock side of the door control switch is pressed when the lock position of any door is unlock.
The doors are unlocked by using the mechanical key.
The doors are unlocked by wireless operation.*
*: w/ Wireless Door Lock Control System
CHECK IGNITION LINKED AUTOMATIC DOOR UNLOCK FUNCTION (w/ Ignition Linked Automatic Door Unlock Function)
When the ignition switch is off, turn the ignition switch to ON.
Check that all doors unlock automatically.
CHECK ILLUMINATED ENTRY FUNCTION
Click hereVehicle Interior>LIGHTING (INT)>LIGHTING SYSTEM>OPERATION CHECK