Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › RADIATOR GRILLE › 2019.02–2019.06
RM35X0E _59 Vehicle Exterior _079322 EXTERIOR PANELS / TRIM _0385749 RADIATOR GRILLE A

EXTERIOR PANELS / TRIM  RADIATOR GRILLE  DISASSEMBLY  


PROCEDURE

Hide 88211B 1.REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Pre-collision System)

Hide 2.REMOVE NUT WITH WASHER (w/ Pre-collision System)

a.
B524313C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the 2 nut with washers as shown in the illustration.


Hide 53122A 3.REMOVE LOWER RADIATOR GRILLE MOULDING

a.

Remove the 2 screws.

B524314


b.

Using a screwdriver, detach the claw and remove the lower radiator grille moulding as shown in the illustration.

HINT:

Tape the screwdriver tip before use.


B545285C01
0,0 0,0 false
V113147

Remove in this Direction
V100135

Order of Removal
V100155

Protective Tape - -



Hide 53141C 4.REMOVE RADIATOR GRILLE GARNISH (w/ Pre-collision System)

a.
B555202C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the 4 screws.


b.

Detach the guide and remove the radiator grille garnish as shown in the illustration.