If the air outlet does not change even after the mode switch display changes, the following causes are possible.
| Malfunction Status | Factor |
|---|---|
| Air vent cannot be changed. (Display changes.) | ·
Malfunction in one of the servo motors ·
Mode damper and link operation (jamming) ·
Air conditioning unit malfunction |
Check that the No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.
No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Click hereVehicle Interior>HEATING / AIR CONDITIONING>FRONT AIR CONDITIONING UNIT (for LHD)>REASSEMBLY
Check for DTCs.
DTC B1443 is not output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG