Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
76801
1.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
except Wagon:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>BACK DOOR OUTSIDE GARNISH (except Wagon)>REMOVAL
81270
2.REMOVE LICENSE PLATE LIGHT ASSEMBLY
|
Protective Tape |
Using a thin-bladed screwdriver, detach the claw.
Tape the thin-bladed screwdriver tip before use.
Disconnect the connector and remove the license plate light assembly.