Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
73240
1.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
Install the front seat belt anchor plate.
| *a | Protruding Part |
Install the front seat inner belt assembly LH with the nut.
Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part.
Attach the claw and clamp.
Connect the connector.
Attach the hook.
71862K
2.INSTALL FRONT SEAT INNER CUSHION SHIELD LH
3.INSTALL FRONT SEAT ASSEMBLY LH
4. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (w/ Front Seat Side Airbag)
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART
5. PERFORM DIAGNOSTIC SYSTEM CHECK (w/ Front Seat Side Airbag)
6.CHECK SRS WARNING LIGHT (w/ Front Seat Side Airbag)
7.INSPECT SEAT BELT WARNING SYSTEM
8.INSPECT FRONT SEAT ASSEMBLY