Home › Vehicle Interior › SEAT › SEAT HEATER CONTROL › from 2019.06
RM35X0E _58 Vehicle Interior _078601 SEAT _0396333 SEAT HEATER CONTROL A

SEAT  SEAT HEATER CONTROL  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.



HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedures listed below are for LHD vehicles.

·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

·

The procedure listed below is a representative example.

·

Use the same procedure for first row and second row, unless otherwise specified.



PROCEDURE

Hide 85861 1.INSTALL SEAT CLIMATE CONTROL ECU

a.
B548153

Install the seat climate control ECU with the 2 nuts.


b.

Connect the connector.


Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for First Row)

Hide 4. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (for First Row)

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART


Hide 7.INSPECT SEAT BELT WARNING SYSTEM

Hide 9.INSPECT SEAT HEATER SYSTEM