867C0
1.INSTALL INNER MIRROR CAMERA ASSEMBLY
w/o Rear View Monitor System:
|
Install in this Direction |
Attach the claw to install the camera cleaner nozzle assembly to the inner mirror camera assembly as shown in the illustration.
|
Install in this Direction |
Attach the claw to install the inner mirror camera assembly with camera cleaner nozzle assembly to the back door panel as shown in the illustration.
w/ Rear View Monitor System:
|
Install in this Direction |
Attach the guide to install the inner mirror camera assembly as shown in the illustration.
Install the 2 screws.
|
Install in this Direction |
Attach the claw to install the inner mirror camera assembly with camera cleaner nozzle assembly to the back door panel as shown in the illustration.
| *A | w/o Rear View Monitor System |
| *B | w/ Rear View Monitor System |
Install the 2 screws.
| *A | w/o Rear View Monitor System |
| *B | w/ Rear View Monitor System |
Connect each connector.
| *A | w/o Rear View Monitor System |
| *B | w/ Rear View Monitor System |
Connect the washer hose.
76801
2.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
except Wagon:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>BACK DOOR OUTSIDE GARNISH (except Wagon)>INSTALLATION
3.ADJUST TELEVISION CAMERA ASSEMBLY
w/ Parking Assist Monitor System:
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM>CALIBRATION
w/ Panoramic View Monitor System:
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>CALIBRATION