If an ECM that is incompatible with the immobiliser function is installed, the ECM will store this DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| B279C95 | Engine Immobiliser System Incorrect Assembly | An ECM that is incompatible with the immobiliser function is installed (1-trip detection logic*). | ECM | - |
*: Only detected while a malfunction is present.
| Vehicle Condition when Malfunction Detected | Fail-safe Function when Malfunction Detected |
|---|---|
| Engine cannot be started | - |
| DTC No. | Data List and Active Test |
|---|---|
| B279C95 | - |
Before replacing the ECM, refer to the Service Bulletin.
Replace the ECM with a new one.
for 7GR-FKS:
Click hereEngine / Hybrid System>7GR-FKS (ENGINE CONTROL)>ECM>REMOVAL
for 1GD-FTV:
Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECM>REMOVAL
| Proceed to |
|---|
| NEXT |
NEXT