To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.
12601B
1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Cover)
89425D
2.REMOVE NO. 5 EXHAUST GAS TEMPERATURE SENSOR
To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.
Disconnect the connector from the No. 5 exhaust gas temperature sensor.
Detach the clamp and disconnect the No. 5 exhaust gas temperature sensor from the No. 2 engine cover bracket.
Using a 14 mm union nut wrench, remove the No. 5 exhaust gas temperature sensor from the No. 2 EGR pipe.