Home › Engine / Hybrid System › 1GD-FTV (STARTING) › ENGINE SWITCH › from 2019.06
RM35X0E _51 Engine / Hybrid System _078666 1GD-FTV STARTING _0398552 ENGINE SWITCH A

1GD-FTV STARTING  ENGINE SWITCH  INSTALLATION  


PROCEDURE

Hide 89611 1.INSTALL ENGINE SWITCH

a.

Attach the 2 claws to install the engine switch to the instrument panel finish panel sub-assembly.


b.

Connect the connector.


Hide 55044C 2.INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY