89760C
1.INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER
|
Nut |
|
Connector |
for Wagon:
Connect the connector.
Attach a clip to temporarily install the tire pressure warning ECU and receiver.
Install the 2 nuts.
except Wagon:
|
Bolt |
|
Connector |
Connect the connector.
Attach the 2 guides to temporarily install the tire pressure warning ECU and receiver.
Install the 2 bolts.
63320E
2.INSTALL REAR ROOF HEADLINING ASSEMBLY
for Semi-trim: Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Semi-trim)>INSTALLATION
for Full-trim: Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Full-trim)>INSTALLATION
for Wagon:Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Wagon)>INSTALLATION
3. REGISTRATION OF TRANSMITTER ID
4.INSPECT TIRE PRESSURE WARNING SYSTEM
5.PERFORM INITIALIZATION