1.REMOVE FRONT SEAT ASSEMBLY LH
for Separate Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type)>REMOVAL
for Fixed Bench Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Fixed Bench Seat Type)>REMOVAL
for Sliding Bench Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Sliding Bench Seat Type)>REMOVAL
for Power Seat:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Power Seat)>REMOVAL
G92C0B
2.REMOVE ECO RUN VEHICLE CONVERTER ASSEMBLY (w/ Stop And Start System)
89678B
3.REMOVE NO. 2 UREA PUMP CONTROL BRACKET (w/o Stop And Start System)
Detach the 2 clips and remove the No. 2 urea pump control bracket from the No. 1 urea pump control bracket.
896B1
4.REMOVE UREA PUMP CONTROL ECU
|
Press |
|
Move in this Direction |
While pressing the lever lock indicated by the arrow shown in the illustration, move the lever in the direction indicated by the arrow shown in the illustration to unlock the connector, and then disconnect the connector from the urea pump control ECU.
After disconnecting a connector, make sure that dirt, water and other foreign matter do not contact the connector.
Remove the 2 bolts and No. 1 urea pump control bracket from the body.
Remove the 3 bolts and No. 1 urea pump control bracket from the urea pump control ECU.