Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY (for Separate Seat Type) › from 2019.06
RM35X0E _58 Vehicle Interior _078602 SEAT BELT _0387848 FRONT SEAT INNER BELT ASSEMBLY(for Separate Seat Type) A

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY(for Separate Seat Type)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.



HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 73240 1.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

a.

Install the front seat belt anchor plate.


b.
B541258C01
0.469,1.854 0.844,1.646 true 0.302,1.781 0.479,1.958 0.177,0.177 10 true *a
*a Protruding Part


Install the front seat inner belt assembly LH with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the front seat inner belt assembly LH to overlap the protruding part.



c.

w/o Sub Wire Harness:

i.

Attach the claw and clamp.

B539081



d.

w/ Sub Wire Harness:

i.

Attach the claw and clamp.

B539082


ii.

Connect the connector.



Hide 73230 2.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

a.

Install the front seat belt anchor plate.


b.
B539077C01
1.917,1.813 2.51,1.656 true 1.708,1.74 1.906,1.927 0.198,0.188 10 true *a
*a Protruding Part


Install the front seat inner belt assembly RH with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the front seat inner belt assembly RH to overlap the protruding part.



c.

w/ Seat Belt Warning System, w/o Front Seat Side Airbag:

i.

Attach the claw and clamp.

B539079


ii.

Connect the connector.



d.

w/ Seat Belt Warning System, w/ Front Seat Side Airbag:

i.

Attach the claw and clamp.

B539080


ii.

Connect the 2 connectors.



Hide 71862K 3.INSTALL FRONT SEAT INNER CUSHION SHIELD LH (for Driver Side)

Hide 71861K 4.INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Front Passenger Side)

Hide 6.INSTALL FRONT SEAT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag)

Hide 8. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL (w/ Front Seat Side Airbag)

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART


Hide 11.INSPECT SEAT BELT WARNING SYSTEM (w/ Seat Belt Warning System)