Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL RECEIVER (except Wagon) › from 2019.06
RM35X0E _58 Vehicle Interior _078336 DOOR LOCK _0388965 DOOR CONTROL RECEIVER(except Wagon) A

DOOR LOCK  DOOR CONTROL RECEIVER(except Wagon)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS


PROCEDURE

Hide 89741 1.INSTALL DOOR CONTROL RECEIVER

a.
B541547C01
0,0 0,0 false
V100135

Bolt
V100136

Connector


Attach the guide to install the door control receiver with the bolt.

NOTICE:
·

Do not subject the door control receiver to strong impacts or force, and do not drop it.

·

Do not reuse the door control receiver that has been dropped.




b.

Connect the connector.


Hide 62632D 2.INSTALL REAR QUARTER TRIM BOARD LH (for Semi-trim)

Hide 62640M 3.INSTALL REAR QUARTER TRIM BOARD ASSEMBLY LH (for Full-trim)

Hide 58777A 4.INSTALL TOOL BAG HOLDER (for Full-trim)

Hide 73370E 5.INSTALL REAR SEAT OUTER BELT ASSEMBLY LH (for Full-trim)

Hide 67935 6.INSTALL BACK DOOR SCUFF PLATE (for Full-trim)

Hide 7.INSTALL REAR SEAT ASSEMBLY LH


b.

for Commuter, 3-Passenger Seat with 2-Point Type Seat Belt and Headrest:

Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for Commuter, 3-Passenger Seat with 2-Point Type Seat Belt and Headrest)>INSTALLATION


c.

for Commuter, 3-Passenger Seat with 2-Point Type Seat Belt without Headrest:

Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for Commuter, 3-Passenger Seat with 2-Point Type Seat Belt without Headrest)>INSTALLATION





g.