Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › CAMSHAFT POSITION SENSOR › from 2020.05
RM35X0E _51 Engine / Hybrid System _078856 1GD-FTV ENGINE CONTROL _0387393 CAMSHAFT POSITION SENSOR A

1GD-FTV ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 11401G 2.REMOVE CAMSHAFT POSITION SENSOR

a.

for Air Cooled Type Intercooler:

i.
A346003

Disconnect the camshaft position sensor connector.


ii.

Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.



b.

for Water Cooled Type Intercooler:

i.
A453964C01
1.021,1.667 1.125,1.729 false
V100135

Camshaft Position Sensor Connector
V100136

Bolt


Disconnect the camshaft position sensor connector.


ii.

Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.