Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › INTAKE AIR TEMPERATURE SENSOR › from 2020.05
RM35X0E _51 Engine / Hybrid System _078856 1GD-FTV ENGINE CONTROL _0387396 INTAKE AIR TEMPERATURE SENSOR A

1GD-FTV ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 89424A 2.REMOVE INTAKE AIR TEMPERATURE SENSOR (for Air Cooled Type Intercooler)

a.
A443560

Disconnect the intake air temperature sensor connector.


b.

Using a 22 mm deep socket wrench, remove the intake air temperature sensor and gasket from the intercooler air tube.


Hide 89424D 3.REMOVE INTAKE AIR TEMPERATURE SENSOR (for Water Cooled Type Intercooler)

a.

for Intake Air Connector:

i.
A454028C02
2.031,1.302 2.333,1.083 2.333,1.083 2.5,1.083 true 2.583,1 2.833,1.167 0.25,0.167 10 true *1
*1 Intake Air Temperature Sensor


Disconnect the intake air temperature sensor connector.


ii.

Using a 17 mm deep socket wrench, remove the intake air temperature sensor and gasket from the intake air connector.



b.

for Intercooler:

i.
A454029C02
2.583,1 2.167,1 2.167,1 1.948,0.833 true 2.667,0.917 2.917,1.083 0.25,0.167 10 true *1
*1 Intake Air Temperature Sensor


Disconnect the intake air temperature sensor connector.


ii.

Using a 17 mm deep socket wrench, remove the intake air temperature sensor and gasket from the intercooler assembly.