2007-2013 Highlander Kluger · Service Manual BRAKE

INSTALLATION

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. INSTALL DISC BRAKE CYLINDER ASSEMBLY

  1. C165871E01
    Hold the front disc brake cylinder slide pins and install the disc brake cylinder assembly with the 2 bolts.

    Torque:
    34 N*m{ 347 kgf*cm , 25 ft.*lbf }

    NOTICE:
    Be sure that the anti-squeal springs are installed to the front disc brake pads.


2. CONNECT FRONT FLEXIBLE HOSE

  1. C165870
    Connect the front flexible hose with a new union bolt and a new gasket to the disc brake cylinder assembly.

    Torque:
    30 N*m{ 306 kgf*cm , 22 ft.*lbf }

    NOTICE:
    Install the front flexible hose lock securely in the lock hole in the disc brake cylinder assembly.


3. BLEED BRAKE SYSTEM
(Click here)

4. INSTALL FRONT WHEEL

Torque:
103 N*m{ 1050 kgf*cm , 76 ft.*lbf }

← INSTALLATION (May 2007 – Jun 2010)COMPONENTS (from May 2007) →