2007-2013 Highlander Kluger · Service Manual BRAKE

INSTALLATION

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL REAR DISC BRAKE CYLINDER ASSEMBLY

  1. C166430
    Install the rear disc brake cylinder assembly to the rear disc brake cylinder mounting with the 2 bolts.

    Torque:
    34 N*m{ 347 kgf*cm , 25 ft.*lbf }


2. CONNECT REAR FLEXIBLE HOSE

  1. C167068
    Connect the rear flexible hose to the rear disc brake cylinder assembly with a new union bolt and a new gasket.

    Torque:
    21 N*m{ 213 kgf*cm , 15 ft.*lbf }


3. BLEED BRAKE SYSTEM
(Click here)

4. ADJUST PARKING BRAKE
(Click here)

5. INSTALL REAR WHEEL

Torque:
103 N*m{ 1050 kgf*cm , 76 ft.*lbf }

← INSTALLATION (Aug 2008 – Jun 2010)COMPONENTS (May 2007 – Jun 2010) →