2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

Pressing Power Switch does not Turn on System

Circuit diagnosis · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

INSPECTION PROCEDURE


1. CHECK VEHICLE CONDITION
  1. Check that conditions in the cabin are not likely to cause condensation.

    HINT:
    This problem occurs if the cabin is humid and the temperature changes rapidly. This may produce condensation, resulting in a short circuit.

    OK:
    Condensation is not likely being produced.



NG
DRY OUT CABIN AND RECHECK CONDITION
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Noise Occurs (from Jul 2010)Pressing Power Switch does not Turn on System (Aug 2008 – Jun 2010) →