Pressing Power Switch does not Turn on System
Circuit diagnosis · Vehicles built Aug 2008 – Jun 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
INSPECTION PROCEDURE
| 1. CHECK VEHICLE CONDITION |
 |
Check that conditions in the cabin are not likely to cause condensation.
- HINT:
- This problem occurs if the cabin is humid and the temperature changes rapidly. This may produce condensation, resulting in a short circuit.
- OK:
- Condensation is not likely being produced.
|
NG |
 |
|
| DRY OUT CABIN AND RECHECK CONDITION |
|
|
| OK |
|
 |
|
| PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|