2007-2013 Highlander Kluger · Service Manual CRUISE CONTROL SYSTEM

DIAGNOSIS SYSTEM

Troubleshooting · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


CHECK DLC3
  1. Check the DLC3 (Click here).


CHECK INDICATOR

  1. E152495E01
    Turn the ignition switch on (IG).

  2. Check that the CRUISE main indicator light illuminates when the cruise control main switch is turned on, and that the indicator light turns off when the main switch is turned off. If the results are not as specified, inspect the CRUISE main indicator light circuit (Click here).

    HINT:
    BE04034E18
    While driving with cruise control, the ECM activates AUTO CANCEL of the cruise control system when a malfunction occurs in one of the following: vehicle speed sensors, stop light switch, or other related parts. When AUTO CANCEL is activated, the CRUISE main indicator light outputs the blinking pattern as shown in the illustration. At the same time, data of the malfunction is stored as a DTC.

← DIAGNOSIS SYSTEM (Aug 2008 – Jun 2010)DTC CHECK / CLEAR (May 2007 – Jul 2008) →