2007-2013 Highlander Kluger · Service Manual CRUISE CONTROL SYSTEM

DTC CHECK / CLEAR

Troubleshooting · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


DTC CHECK
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG).

  3. Turn the tester main switch on.

  4. Select the following menu items: Powertrain / Cruise Control / Trouble Codes.

  5. Check the details of the DTC(s) (Click here).


DTC CLEAR
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG).

  3. Turn the tester main switch on.

  4. Select the following menu items: Powertrain / Cruise Control / Trouble Codes.

  5. Erase the DTCs.

← DIAGNOSIS SYSTEM (from Jul 2010)DTC CHECK / CLEAR (Aug 2008 – Jun 2010) →