2007-2013 Highlander Kluger · Service Manual CRUISE CONTROL SYSTEM

DTC CHECK / CLEAR

Troubleshooting · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


DTC CHECK
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG).

  3. Turn the tester main switch on.

  4. Select the following menu items: Powertrain / Cruise Control / Trouble Codes.

  5. Check the details of the DTC(s) (Click here).


DTC CLEAR
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG).

  3. Turn the tester main switch on.

  4. Select the following menu items: Powertrain / Cruise Control / Trouble Codes.

  5. Erase the DTCs.

← DTC CHECK / CLEAR (May 2007 – Jul 2008)DTC CHECK / CLEAR (from Jul 2010) →