2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

Map Disc cannot be Inserted

Circuit diagnosis · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

INSPECTION PROCEDURE


1. CHECK NAVIGATION RECEIVER ASSEMBLY
  1. Check if a disc is inserted into the MAP disc slot.

    1. Check if "DISC IN" comes on.

      OK:
      "DISC IN" comes on.



NG
EJECT DISC
OK


2. CHECK MAP DISC
I100152E12
  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks on the map disc.



NG
REPLACE MAP DISC
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Map Disc cannot be Inserted (May 2007 – Jul 2008)Map Disc cannot be Inserted (from Jul 2010) →