2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

Map Disc cannot be Inserted

Circuit diagnosis · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

INSPECTION PROCEDURE


1. CHECK NAVIGATION RECEIVER ASSEMBLY
  1. Enter the "LOAD EJECT" screen.

  1. Check if a map disc is inserted into the map disc slot.

    1. E190570E01
      Check if "DISC IN" is on.

      Result:
      Result
      Proceed to
      "DISC IN" is off.
      A
      "DISC IN" is on.
      B

      Text in Illustration 
      *a
      Example



B
EJECT MAP DISC
A


2. CHECK MAP DISC
I100152E12
  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks on the map disc



NG
REPLACE MAP DISC
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Map Disc cannot be Inserted (Aug 2008 – Jun 2010)Vehicle Position Mark Deviates Greatly (May 2007 – Jul 2008) →