2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

Cursor or Map Rotates when Vehicle Stopped

Circuit diagnosis · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

INSPECTION PROCEDURE


1. CHECK CONDITION

  1. E106418
    Check with the customer if the vehicle has been turned by a turntable.

    OK:
    Vehicle has not been turned by turntable.

    HINT:
    If the vehicle is turned on a turntable with the ignition switch ON, the system may store the angular velocity. As a result, the vehicle position cursor may deviate.



NG
TURN IGNITION SWITCH TO ON WHEN VEHICLE IS COMPLETELY STOPPED
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Cursor or Map Rotates when Vehicle Stopped (Aug 2008 – Jun 2010)Vehicle Position Mark is not Updated (May 2007 – Jul 2008) →