2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

Screen Flicker or Color Distortion

Circuit diagnosis · Vehicles built from Jul 2012

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 Jul 2010 – Jun 2012 from Jul 2012

INSPECTION PROCEDURE


1. CHECK DISPLAY SETTING

  1. E190566E04
    Enter the display quality adjustment screen.

  1. Reset display settings (contrast, brightness) and check that the screen appears normal.

    OK:
    The display returns to normal.

    Text in Illustration 
    *a
    Example



NG
Go to step 2
OK

END

2. CHECK CABIN
  1. Check that the cabin temperature is higher than -20°C (-4°F).

    OK:
    The cabin temperature is higher than -20°C (-4°F).



NG
HEAT CABIN AND RECHECK TEMPERATURE
OK


3. CHECK COLOR BAR (OPERATION CHECK)

  1. E176520
    Enter the "Color Bar Check Mode" screen (Check Color Bar) (Click here).

  1. Check that the color bars match the displayed names.

    OK:
    Color bars match the displayed names.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Screen Flicker or Color Distortion (Jul 2010 – Jun 2012)Poor Sound Quality in All Modes (Low Volume) (May 2007 – Jul 2008) →