ON-VEHICLE INSPECTION
Inspection · Vehicles built Aug 2008 – Jun 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| FRONT SEAT SIDE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION) |
Perform a diagnostic system check (Click here).
With the front seat side airbag assembly installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the front seat assembly with a new one:

- Cuts, minute cracks or marked discoloration on the front seatback assembly around the front seat side airbag assembly.
- Cuts, minute cracks or marked discoloration on the front seatback assembly around the front seat side airbag assembly.
| FRONT SEAT SIDE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED) |
Perform a diagnostic system check (Click here).
With the front seat side airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the front seat assembly with a new one:

- Make sure that there are no scratches, broken or frayed threads on the surface of the front seat side airbag assembly base fabric.
- A front seat side airbag assembly that has been dropped.
- A front seat side airbag assembly with a deformed installation part.
- Cracks or other damage to the wire harness or connector.
- CAUTION:
- Be sure to follow the correct removal and installation procedures.
- Make sure that there are no scratches, broken or frayed threads on the surface of the front seat side airbag assembly base fabric.
