2007-2013 Highlander Kluger · Service Manual RESTRAINTS

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


FRONT SEAT SIDE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
  1. Perform a diagnostic system check (Click here).

  1. C165109
    With the front seat side airbag assembly installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the front seat assembly with a new one:
    1. Cuts, minute cracks or marked discoloration on the front seatback assembly around the front seat side airbag assembly.


FRONT SEAT SIDE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
  1. Perform a diagnostic system check (Click here).

  1. C133880
    With the front seat side airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the front seat assembly with a new one:
    1. Make sure that there are no scratches, broken or frayed threads on the surface of the front seat side airbag assembly base fabric.
    2. A front seat side airbag assembly that has been dropped.
    3. A front seat side airbag assembly with a deformed installation part.
    4. Cracks or other damage to the wire harness or connector.

    CAUTION:
    Be sure to follow the correct removal and installation procedures.

← ON-VEHICLE INSPECTION (Aug 2008 – Jun 2010)REMOVAL (May 2007 – Jul 2008) →