2007-2013 Highlander Kluger · Service Manual TRANSMISSION

DIAGNOSTIC TROUBLE CODE CHART

Diagnostic trouble codes · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

If a DTC is displayed during the DTC check, check the parts listed in the table below and proceed to the page given.

HINT:
  1. *1: Comes on MIL (Malfunction Indicator Lamp) light up
  2. *2: "DTC stored" mark means ECM memorizes the malfunction code if the ECM detects the DTC detection condition.
  3. This DTC may be output when the clutch, brake and gear components etc. inside the automatic transmission are damaged.

AUTOMATIC TRANSAXLE SYSTEM: 
DTC Code
Detection Item
Trouble Area
MIL *1
Memory *1
See page
P0705
Transmission Range Sensor Circuit Malfunction (PRNDL Input)
1. Open or short in park/neutral position switch circuit
2. Park/neutral position switch
3. ECM
Comes on
DTC stored
Click here
P0710
Transmission Fluid Temperature Sensor "A" Circuit
1. Open or short in ATF temperature sensor circuit
2. Transmission wire (ATF temperature sensor)
3. ECM
Comes on
DTC stored
Click here
P0711
Transmission Fluid Temperature Sensor "A" Performance
1. Transmission wire (ATF temperature sensor)
Comes on
DTC stored
Click here
P0712
Transmission Fluid Temperature Sensor "A" Circuit Low Input
1. Short in ATF temperature sensor circuit
2. Transmission wire (ATF temperature sensor)
3. ECM
Comes on
DTC stored
Click here
P0713
Transmission Fluid Temperature Sensor "A" Circuit High Input
1. Open in ATF temperature sensor circuit
2. Transmission wire (ATF temperature sensor)
3. ECM
Comes on
DTC stored
Click here
P0717
Turbine Speed Sensor Circuit No Signal
1. Open or short in transmission revolution sensor NT (speed sensor NT) circuit
2. Transmission revolution sensor NT (speed sensor NT)
3. ECM
4. Automatic transaxle assembly
Comes on
DTC stored
Click here
P0724
Brake Switch "B" Circuit High
1. Short in stop light switch circuit
2. Stop light switch
3. ECM
Comes on
DTC stored
Click here
P0741
Torque Converter Clutch Solenoid Performance (Shift Solenoid Valve DSL)
1. Shift solenoid valve DSL remains open or closed
2. Valve body is blocked
3. Torque converter clutch
4. Automatic transaxle (clutch, brake or gear etc.)
5. Line pressure is too low
Comes on
DTC stored
Click here
P0746
Pressure Control Solenoid "A" Performance (Shift Solenoid Valve SL1)
1. Shift solenoid valve SL1 remains open or closed
2. Valve body is blocked
3. Automatic transaxle (clutch, brake or gear etc.)
Comes on
DTC stored
Click here
P0748
Pressure Control Solenoid "A" Electrical (Shift Solenoid Valve SL1)
1. Open or short in shift solenoid valve SL1 circuit
2. Shift solenoid valve SL1
3. ECM
Comes on
DTC stored
Click here
P0766
Shift Solenoid "D" Performance (Shift Solenoid Valve S4)
1. Shift solenoid valve S4 remains open or closed
2. Valve body is blocked
3. Automatic transaxle (clutch, brake or gear, etc.)
Comes on
DTC stored
Click here
P0771
Shift Solenoid "E" Performance (Shift Solenoid Valve SR)
1. Shift solenoid valve SR remains open or closed
2. Valve body is blocked
3. Automatic transaxle (clutch, brake or gear, etc.)
Comes on
DTC stored
Click here
P0776
Pressure Control Solenoid "B" Performance (Shift Solenoid Valve SL2)
1. Shift solenoid valve SL2 remains open or closed
2. Valve body is blocked
3. Automatic transaxle (clutch, brake or gear, etc.)
Comes on
DTC stored
Click here
P0778
Pressure Control Solenoid "B" Electrical (Shift Solenoid Valve SL2)
1. Open or short in shift solenoid valve SL2 circuit
2. Shift solenoid valve SL2
3. ECM
Comes on
DTC stored
Click here
P0793
Intermediate Shaft Speed Sensor "A"
1. Open or short in transmission revolution sensor NC (speed sensor NC) circuit
2. Transmission revolution sensor NC (speed sensor NC)
3. ECM
Comes on
DTC stored
Click here
P0796
Pressure Control Solenoid "C" Performance (Shift Solenoid Valve SL3)
1. Shift solenoid valve SL3 remains open or closed
2. Valve body is blocked
3. Automatic transaxle (clutch, brake or gear, etc.)
Comes on
DTC stored
Click here
P0798
Pressure Control Solenoid "C" Electrical (Shift Solenoid Valve SL3)
1. Open or short in shift solenoid valve SL3 circuit
2. Shift solenoid valve SL3
3. ECM
Comes on
DTC stored
Click here
P0982
Shift Solenoid "D" Control Circuit Low (Shift Solenoid Valve S4)
1. Short in shift solenoid valve S4 circuit
2. Shift solenoid valve S4
3. ECM
Comes on
DTC stored
Click here
P0983
Shift Solenoid "D" Control Circuit High (Shift Solenoid Valve S4)
1. Open in shift solenoid valve S4 circuit
2. Shift solenoid valve S4
3. ECM
Comes on
DTC stored
Click here
P0985
Shift Solenoid "E" Control Circuit Low (Shift Solenoid Valve SR)
1. Short in shift solenoid valve SR circuit
2. Shift solenoid valve SR
3. ECM
Comes on
DTC stored
Click here
P0986
Shift Solenoid "E" Control Circuit High (Shift Solenoid Valve SR)
1. Open in shift solenoid valve SR circui
2. Shift solenoid valve SR
3. ECM
Comes on
DTC stored
Click here
P2714
Pressure Control Solenoid "D" Performance (Shift Solenoid Valve SLT)
1. Shift solenoid valve SLT remains closed
2. Valve body is blocked
3. Torque converter clutch
4. Automatic transaxle (clutch, brake or gear, etc.)
Comes on
DTC stored
Click here
P2716
Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT)
1. Open or short in shift solenoid valve SLT circuit
2. Shift solenoid valve SLT
3. ECM
Comes on
DTC stored
Click here
P2769
Torque Converter Clutch Solenoid Circuit Low (Shift Solenoid Valve DSL)
1. Short in shift solenoid valve DSL circuit
2. Shift solenoid valve DSL
3. ECM
Comes on
DTC stored
Click here
P2770
Torque Converter Clutch Solenoid Circuit High (Shift Solenoid Valve DSL)
1. Open in shift solenoid valve DSL circuit
2. Shift solenoid valve DSL
3. ECM
Comes on
DTC stored
Click here
← DATA LIST / ACTIVE TEST (from Jul 2010)DIAGNOSTIC TROUBLE CODE CHART (Aug 2008 – Jun 2010) →