Interview the customer and confirm the problem (Click here).
HINT:
Interview the customer to confirm the following:
History of brake fluid replacement.
Whether the engine was stopped intentionally when driving.
Whether the brake and accelerator pedals were depressed simultaneously.
NEXT
3.CHECK DTC AND FREEZE FRAME DATA*
Check and record DTCs and Freeze Frame Data.
Clear the DTCs and Freeze Frame Data (Click here for DTC Check/Clear, or Click here for Freeze Frame Data).
Reconfirm the DTCs.
Reconfirm the DTCs based on the recorded DTCs and Freeze Frame Data (Click here for DTC Check/Clear, or Click here for Freeze Frame Data).
HINT:
When DTCs indicating CAN communication system malfunctions are output, repair the CAN communication system before repairing each corresponding sensor (Click here).
If any of DTCs U0100, U0123, U0124, and U0126 is output together with a CAN communication DTC, first check the appropriate sensor for a momentary open circuit (Click here).
Result:
Result
Proceed to
DTC is output
A
DTC is not output (Problem symptom does not occur)
B
DTC is not output (Problem symptom occurs)
C
B.
C.
A
4.DIAGNOSTIC TROUBLE CODE CHART
Proceed to Diagnostic Trouble Code Chart (Click here).