2007-2013 Highlander Kluger · Service Manual BRAKE

C1201 Engine Control System Malfunction

Diagnostic trouble codes · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

DESCRIPTION

If a malfunction in the engine control system is detected, the operation of VSC and TRC is prohibited by the fail safe function. When the signals from the engine are input normally, the fail safe control is cancelled and the DTC is not stored.
DTC Code
DTC Detection Condition
Trouble Area
C1201
Engine control system malfunction signal continues for 1 second or more.
Engine control system

INSPECTION PROCEDURE


1. CHECK ENGINE CONTROL SYSTEM
  1. Check if any engine control system DTC is output (Click here for 2GR-FE).

    Result:
    Result
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
INSPECT ENGINE CONTROL SYSTEM (for 2GR-FE) (Click here)
A

REPLACE ECM (for 2GR-FE) (Click here)


← C1201 Engine Control System Malfunction (Aug 2008 – Jun 2010)C1203 ECM Communication Circuit Malfunction (May 2007 – Jul 2008) →