2007-2013 Highlander Kluger · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


INSPECT COOLING FAN SYSTEM
  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch on (IG).

  1. Enter the following menus: Powertrain / Engine / Active Test / Control the Cooling Fan.

  1. Check the operation of the cooling fan while operating it using the intelligent tester.
    If the cooling fan motor does not operate, check the cooling fan circuit (Click here).

← ON-VEHICLE INSPECTION (May 2007 – Jul 2008)ON-VEHICLE INSPECTION (from Jul 2010) →