2007-2013 Highlander Kluger · Service Manual STEERING

TERMINALS OF ECU

System information · Vehicles built from May 2007

C106482E14

STEERING LOCK ACTUATOR ASSEMBLY (STEERING LOCK ECU)
Terminal No. (Symbols)
Wiring Color
Terminal Description
Condition
Specified Condition
D10-1 (GND) - Body ground
W-B - Body ground
Ground
Always
Below 1 V
D10-2 (SGND) - Body ground
W - Body ground
Signal ground
Always
Below 1 V
D10-3 (IGE) - D10-1 (GND)
Y - W-B
Power source for driving motor
Motor is in operation
Below 1 V
Motor is not in operation
11 to 14 V
D10-4 (SLP1) - D10-2 (SGND)
O - W
Unlock position sensor output signal
Steering is locked
11 to 14 V
Steering lock is released
Below 1 V
D10-5 (LIN) - D10-2 (SGND)
GR - W
LIN communication bus
Engine switch on (IG)
Pulse generation
D10-6 (IG2) - D10-1 (GND)
V - W-B
IG signal input
Engine switch on (IG)
11 to 14 V
D10-7 (B) - D10-1 (GND)
G - W-B
Power source
Always
11 to 14 V
← PROBLEM SYMPTOMS TABLE (from Jul 2010)DIAGNOSIS SYSTEM (May 2007 – Jul 2008) →