2007-2013 Highlander Kluger · Service Manual STEERING

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


CHECK FOR DTCS
  1. Prepare the intelligent tester.

  2. Connect the intelligent tester to the DLC3 at the lower part of the instrument panel.

  3. Turn the engine switch on (IG) and turn the intelligent tester on.

  4. Use the intelligent tester to check for DTCs, and note or print the result (see the operator's manual for operating instructions).

  5. Confirm the details of the DTCs (Click here).


CLEAR DTCS
  1. Operate the intelligent tester to clear the DTCs (see the operator's manual for operating instructions).

← DTC CHECK / CLEAR (Aug 2008 – Jun 2010)DATA LIST / ACTIVE TEST (from May 2007) →