2007-2013 Highlander Kluger · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from May 2007


CHECK POWER SOURCE MODE CHANGE FUNCTION
  1. Check the function of the engine switch.

    1. Check that power source mode changes in accordance with the conditions of the shift position and brake pedal.

      Brake Pedal
      Shift Lever
      Power Source Mode Pattern
      Depressed
      P or N Position
      When the engine switch is pushed once.
      1. off → engine start
      2. on (ACC) → engine start
      3. on (IG) → engine start
      Not depressed
      P position
      Each time the engine switch is pushed.
      1. off → on (ACC) → on (IG) → off
      Except P Position
      Each time the engine switch is pushed.
      1. off → on (ACC) → on (IG) → on (ACC)
      -
      P Position
      When the engine switch is pushed with power source mode on (IG) (engine running).
      1. on (IG) → off
      -
      Except P Position
      When the engine switch is pushed with power source mode on (IG) (engine running).
      1. on (IG) → on (ACC)

  1. Check if power source mode changes without pressing the engine switch.

    1. With power source mode on (ACC) and the shift position in P, wait for at least 1 hour. Check that power source mode changes from on (ACC) to off automatically.


CHECK INDICATOR CONDITION

  1. A109251E01
    Check the indicator on the engine switch.

    1. Check that the engine switch indicator turns on and changes color according to the table below.

      Power Source Mode/Condition
      Indicator Light Condition
      Brake pedal released
      Brake pedal depressed, shift lever in P or N
      off
      OFF
      ON (Green) (When key and vehicle IDs match)
      on (ACC, IG)
      ON (Amber)
      ON (Green)
      Engine running
      OFF
      OFF
      Steering lock not unlocked
      Flashes (Green) for 15 sec.
      Flashes (Green) for 15 sec.
      System malfunction
      Flashes (Amber) for 15 sec.
      Flashes (Amber) for 15 sec.

← DIAGNOSTIC TROUBLE CODE CHART (from Jul 2010)B2271 Ignition Hold Monitor Malfunction (May 2007 – Jun 2010) →