2007-2013 Highlander Kluger · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT UNDERDRIVE PLANETARY GEAR PRELOAD

  1. D025593E01
    Using SST, secure the underdrive planetary gear assembly.
    SST
    09387-00050  

  1. D025594E01
    Using SST and a torque wrench, measure the turning torque of the underdrive planetary gear assembly while rotating the torque wrench at 60 rpm.
    SST
    09387-00050  

    Turning torque at 60 rpm.:
    0.50 to 1.42 N*m (5.1 to 14.5 kgf*cm, 4.4 to 12.6 in.*lbf)

    HINT:
    Use a torque wrench with a fulcrum length of 160 mm (6.3 in.).

← DISASSEMBLY (from May 2007)REASSEMBLY (from May 2007) →