2007-2013 Highlander Kluger · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation · Vehicles built from May 2007


1. INSTALL SHIFT SOLENOID VALVE SL1

  1. C089115
    Install the shift solenoid valve SL1 and lock plate to the valve body assembly with the bolt.

    Torque:
    6.6 N*m{ 67 kgf*cm , 58 in.*lbf }


2. INSTALL SHIFT SOLENOID VALVE SL2

  1. C089113E01
    Install the shift solenoid valve SL2 and lock plate to the valve body assembly with the bolt.

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }


3. INSTALL SHIFT SOLENOID VALVE DSL

  1. D026443
    Install the shift solenoid valve DSL to the valve body assembly with the bolt.

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }


4. INSTALL SHIFT SOLENOID VALVE SR

  1. D026438
    Install the shift solenoid valve SR to the valve body assembly.


5. INSTALL SHIFT SOLENOID VALVE S4

  1. D026442
    Install the shift solenoid valve S4 to the valve body assembly with the bolt.

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }


6. INSTALL SHIFT SOLENOID VALVE SL3
  1. Install the shift solenoid valve SL3 to the valve body assembly.


7. INSTALL SHIFT SOLENOID VALVE SLT

  1. C089112E01
    Install the shift solenoid valve SLT and lock plate to the valve body assembly with the bolt.

    Torque:
    6.6 N*m{ 67 kgf*cm , 58 in.*lbf }

← INSPECTION (from May 2007)INSTALLATION (May 2007 – Jul 2008) →