DISPLAY CHECK MODE
Troubleshooting · Vehicles built Aug 2008 – Jun 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010
- HINT:
- This mode checks the color display on the display.
- Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.
- This mode checks the color display on the display.
| ENTER DIAGNOSTIC MODE (Click here) |
| DISPLAY CHECK |
Select "Display Check" from the "Diagnosis MENU" screen.

| COLOR BAR CHECK |
Select "Color Bar Check" from the "Display Check" screen.

Select a color bar from the "Color Bar Check Mode" screen.

Check the display color.
- HINT:
- The entire screen turns to the color or stripe selected.
- Touching the display will return to the "Color Bar Check" screen.
- The entire screen turns to the color or stripe selected.
| TOUCH SWITCH CHECK |
Select "Touch Switch Check" from the "Display Check" screen.

Touch the display anywhere in the open area to perform the check when the "Touch Switch Check" screen is displayed.

- HINT:
- A "+" mark is displayed where the display is touched.
- The "+" mark remains on the display even after the finger is removed.
- A "+" mark is displayed where the display is touched.
| PANEL SWITCH CHECK |
Select "Panel Switch Check" from the "Display Check" screen.

Operate each switch and check that the switch names and condition are correctly displayed.

Display
Contents
Push switch name/*1
- Name of the pressed switch is displayed.
- If more than one switch is pressed, "MULTIPLE" is displayed.
Rotary switch name/*2
Name of the rotary switch is displayed.
Rotary switch direction/*3
Direction of the rotary switch is displayed.
- Name of the pressed switch is displayed.
| VEHICLE SIGNAL CHECK |
Select "Vehicle Signal Check" from the "Display Check" screen.

When the "Vehicle Signal Check Mode" screen is displayed, check all the vehicle signal conditions.

- HINT:
- Only conditions having inputs are displayed.
- This screen is updated once per second when input signals to the vehicle are changed.
- For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION (Click here).
- Only conditions having inputs are displayed.