2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

NAVIGATION CHECK MODE

Troubleshooting · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010

HINT:
  1. This mode displays GPS satellite information.
  2. Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.


ENTER DIAGNOSTIC MODE (Click here)

NAVIGATION CHECK

  1. E120058
    Select "Navigation Check" from the "Diagnosis MENU" screen.


GPS INFORMATION

  1. E120059E75
    Select "GPS Information" from the "Navigation Check" screen.

  2. E153240
    When GPS information is displayed, check the GPS conditions.

    HINT:
    1. This screen is updated once per second when input signals to the vehicle are changed.
    2. For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION (Click here).


VEHICLE SENSORS

  1. E120059E46
    Select "Vehicle Sensors" from the "Navigation Check" screen.

  2. E120060
    Check all the signals and sensors when vehicle signal information is displayed.

    HINT:
    1. This screen is updated once per second when input signals to the vehicle are changed.
    2. This screen displays vehicle signals input to the built-in navigation ECU.
    3. For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION (Click here).


COLOR BAR CHECK

  1. E120059E47
    Select "Color Bar Check" from the "Navigation Check" screen.

  2. I100050
    Check each color of the color bar when the "NAVI Color Bar Check" screen is displayed.

    HINT:
    1. Colors will not be displayed in the full-screen as in "Display Check Mode".
    2. This screen displays the built-in navigation ECU display color.


MEMORY COPY/PASTE
E120059E48

HINT:
This function cannot be used.


PARTS INFORMATION

  1. E120059E49
    Select "Parts Information" from the "Navigation Check" screen.

  2. I100052E02
    Check the navigation and disc information when the "Parts Information" screen is displayed.
    Screen Description: 
    Display
    Contents
    Navigation Manufacturer/*1
    Navigation receiver assembly manufacturer is displayed.
    Navigation Version/*2
    Navigation receiver assembly version is displayed.
    Disc Manufacturer/*3
    Map disc manufacturer is displayed.
    Disc Version/*4
    Map disc version is displayed.


MIC & VOICE RECOGNITION CHECK

  1. E120059E50
    Select "Mic & Voice Recognition Check" on the "Navigation Check" screen to display the "MICROPHONE & VOICE RECOGNITION CHECK" screen.

  2. E120056E03
    When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.

  3. Push the recording switch and perform voice recording.

  4. Check that the recording indicator remains on while recording and that the recorded voice is played normally.

    HINT:
    1. For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION (Click here).
    2. This function is controlled by the built-in navigation ECU.


DVD PLAYER INFORMATION CHECK

  1. E120059E51
    Select "DVD Player Information" from the "Navigation Check" screen.

  2. E120061E02
    Check for DTCs.

    HINT:
    1. This is a DVD player check function in the navigation receiver assembly (built-in navigation ECU).
    2. For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION (Click here).

← NAVIGATION CHECK MODE (May 2007 – Jul 2008)DIAGNOSIS DISPLAY DETAILED DESCRIPTION (May 2007 – Jul 2008) →