2007-2013 Highlander Kluger · Service Manual SUSPENSION & AXLE

DISPOSAL

Removal / installation · Vehicles built from May 2007


1. DISPOSE OF FRONT SHOCK ABSORBER

  1. C149517E01
    Position the front shock absorber assembly level with the piston rod fully extended. Using a drill, make a hole in the cylinder between A and B as shown in the illustration to discharge the gas inside.

    NOTICE:
    1. The gas is colorless, odorless, and nonpoisonous.
    2. Be careful when drilling because shards of metal may fly about, so always use the proper safety equipment.

← INSTALLATION (from Jul 2010)COMPONENTS (from May 2007) →