2007-2013 Highlander Kluger · Service Manual RESTRAINTS

DIAGNOSIS SYSTEM

Troubleshooting · Vehicles built from May 2007


DESCRIPTION
  1. The seat belt warning system data can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform repairs.


CHECK DLC3
  1. Check DLC3 (Click here).


INSPECT BATTERY VOLTAGE
If the voltage is below 11 V, recharge or replace the battery before proceeding.

Standard voltage:
11 to 14 V

← TERMINALS OF ECU (from May 2007)DATA LIST / ACTIVE TEST (from May 2007) →