58-43 SPD Signal Error
Diagnostic trouble codes · Vehicles built May 2007 – Jul 2008
Also covers:
- 80-43 SPD Signal Error
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010
DESCRIPTION
| DTC No. |
DTC Detection Condition |
Trouble Area |
| 58-43 |
A difference between the GPS speed and SPD pulse is detected. |
|
| 80-43 |
A difference between the GPS speed and SPD pulse is detected. |
INSPECTION PROCEDURE
- HINT:
- After the inspection is completed, clear the DTCs.
| 1. CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE) |
Enter the "Navigation Check" mode (Vehicle Sensors) (Click here).

While driving the vehicle, compare the "SPD" indicator to the reading on the speedometer. Check if these readings are almost equal.
- OK:
- The readings are almost equal.
|
|
||||
| OK | ||
| ||
| 2. PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE |
| NEXT | ||
| ||
